It's best to install HydroRocks™ in "odd" numbers: 1,3,5,7, and so on. There is minimal excavation, little space required, and the average homeowner or contractor can install them is just a few short hours! All the plumbing lines are hidden from view in the river rock layer.
When they're turned off, all the water disappears into the HydroChamber™. There is no standing water!
When the pump is turned on, water is pumped from the HydroChamber™ and bubbles upward out of the top of the HydroRocks™ and cascades down the sides into a pool or stream lined with decorative stones.
The water then travels to the HydroSieve™ to capture debris into an easy to clean filter basket. Water then passes back to the HydroChamber™.
Each HydroRock™ is plumbed with its own ball valve to "dial-in" just the right amount of water flow.
HydroRocks™ are especially attractive at night when they're lit up with LED HydroLights™!
HydroRocks™ by Russell Technolgies™ are a quick, easy, economical way to add the magic sound of falling water into any garden or landscape!
HydroRocks™ are available in a wide variety of sizes. The more HydroRocks™, the larger the pump should be. Typically, 750 gph - 1,500 gph per HydroRock™ is ideal. An easy "rule of thumb" is approximately 1,000 gph per HydroRock™.
Three HydroRocks™ = an estimated pump flow rate of 3,000 gph.
