Filter-Ectomies™ Replacing Obsolete Waterfall Filters with Technologically Advanced Hydro Vortex™ Filters

Dig down behind the filter and cut the inlet pipe.
Disassemble the waterfall rocks.
Disconnect the liner gasket flange - and separate the liner from the filter.
Lift the filter out of its position and discard.
Dig a trench from the filter excavation through the berm behind the filter - for the Hydro Vortex™ filter's drain line.
Install the Hydro Vortex™ filter.

Attach the plumbing and liner the liner.
Rebuild the waterfalls.
Expose as section of the main line near the filter.
Splice in the HydroFlush™ Valve inside a valve box.
Dig a trench from the HydroFlush™ valve to the top of the Hydro Vortex™ filter.
Install the HydroFlush™ pipe, backwash jet, and the drain valve.
Conceal the top of the filter with river rock and turn the pump on - you're done!