Make sure the PVC pipe is at least 3"-4" inside the rubber coupler.
Then tighten the Stainless Steel nut of the Stainless Steel Hose Clamp and the pipe is now connected to the HydroClean™ Pond Skimmer. Simple. Easy. Quick. You can now attach the pond's rubber liner directly to the PVC pipe.
Remote Installation Pipe Guidelines
Attach 6" PVC pipe the same way as 4" pipe, but with a straight 6"x6" Rubber Coupler.
Apply a solid bead of the included 100% Silicone Sealant to the HydroClean™ Pond Skimmer's Inlet Pipe. Slide the 6"x6" Rubber Coupler over the Siliconed end of the inlet pipe and tighten the Stainless Steel nut. You can attach the Rubber coupler to the pipe first if you so choose.
With solid beads of Silicone Sealant on both the HydroClean™ Pond Skimmer's Inlet Pipe and the 6" PVC pipe, slide the ends into the 6"x6" rubber coupler and tighten the Stainless Steel nuts of the the Stainless Steel Hose Clamps.
The HydroClean™ Pond Skimmer is now attached to 6" PVC pipe! Simple. Easy. Quick.
Previous page ...
Remote Installation Pipe Guidelines ...
All HydroClean™ Pond Skimmers and Pre-Filters ...
Attaching Liner to HydroClean Skimmers and Pre-Filters ...
